The basic principle of our vacum detector:f the tank(botte)vacuum degree is diferent in the body.Tanklid(botte)caused by the shapeof the deformation is also different,The machine with precision components detect tiny deformation of the lid,Data by computerautomatically,Immediately analyze whether the products meet the requirements of vacuum degree,The vacuum degree did not meet theproduct immediately launched bythe cylinder behind the conveyor line.So the device can dynamic on-line detection on the conveyor belt.And automaticlly picking after test did not reach the set of "vacum"or "inner pressure tank (botte).The machine is suitable for twopieces of aluminum cans,3-piece cans,glass botles,and all he other combined with type of container.With a simple and efficientoperation.ts key components with German and Japanese products.For the domestic initiative,The only replace imported high-techproducts,Over the years has been widely used in many beverage and cannery's factory.
Scope of application characteristics:
Suited for the jar inside a vacuum in the same sealing machine productionline,Mixed very different sealing machine can not detect,Because hasdifferent machine sealing datum gap is very large.
Minimal Deviation,good repeatability,if must replace the tank type,veryeasy to adjust.
Precision infrared positioning system,500/m(high speed)and 300p/m(normal)two model.5133 type of can is unlimited tank above.
Any container,regardless of the tin,aluminum cans,glass bottles,aluminum foil sealing,or plastic container,As long as the diameter above 50 mm,all can check.5.As long as 50℃ temperature stability of the following are detectable.6.Only take the length of the conveyor belt,50 cm.
The main parameters:
Diameter:φ52-105mm
High:39~133mm
Capacity:0~500Tank/Min
Weight:40kg
Size:control panel:400×350×800mm
Detection of parts:380×250×280mm
